by admin ~ July 23rd, 2008. Filed under: Gas saving devices.

ScanGuage is an amazing computer that will plug into your car’s ODB II connector (all cars built after 1996 have one) and will report on several different things, the most important of which is your fuel economy! You’ll be amazed when you stomp on the gas and notice that you are getting a whopping 2 miles per gallon (no more racing from the light).

ScanGuage provides three main functions:


Automatically tracks four sets of trip data – Each with 11 individually
stored parameters.

* Maximum Speed
* Average Speed
* Maximum Coolant Temperature
* Maximum RPM
* Driving Time
* Driving Distance
* Fuel Used
* Trip Fuel Economy
* Distance to Empty
* Time to Empty
* Fuel to Empty


Display 4 gauges at a time from the 12 built-in digital gauges. the
information is presented in Real-time!

* Fuel Economy
* Fuel Rate
* Battery Voltage
* Coolant Temperature
* Intake Air Temperature
* Engine Speed (RPM)
* Vehicle speed (MPH)
* Manifold Pressure (not available on some vehicles)
* Engine Load
* Throttle Position
* Ignition Timing
* Open/Closed Loop


The ScanGaugeII allows you to troubleshoot your own car, read error
codes, and the conditions present when the error occurred. You can also
turn off the “Check Engine” light and avoid those costly trips to the

* Reads Trouble Codes
* Reads conditions that set the Trouble Code
* Clears Trouble Codes
* Turns off the “Check Engine” light
* Tells you when vehicle is “Ready” to pass OBDII testing
* Make and store up to 10 rewritable special codes to send to the vehicle computer

[phpbay]ScanGuage, 50, “6028”, “BlendMount”[/phpbay]

[phpbay]BlendMount, 5, “6028”, “”[/phpbay]

Leave a Reply

You must be logged in to post a comment.